配置集群管理（Cluster
Manager）
16.安装工具需要以下信息来配置集群管理（Cluster Manager）。1）集群中每个系统使用的公共网卡。2）集群管理（Cluster Manager）使用的虚拟IP地址和子网掩码。
The following information is required to configure Cluster Manager:
A public NIC used by each system in the cluster
A Virtual IP address and netmask for Cluster Manager
Do you want to configure Cluster Manager (Web Console) [y,n,q](Y)
Press Return to configure Cluster Manager (Web Console) on the systems. Enter “n”
to skip configuring Cluster Manager and advance to configure SMTP notification.
回车确认。否则输入“n”跳过集群管理（Cluster Manager）安装，到配置SNMP通知安装步骤。
17. 在第一台主机，确定是否使用已找到的公共网卡，按回车选中。否则输入另一块公共网卡后按回车。
Active NIC devices discovered on north: hme0
Enter the NIC for Cluster Manager (Web Console) to use on north:[b,?](hme0)
Press Return if the discovered NIC is the one to use. Otherwise, type the name of a NIC to use and press Return.
Is hme0 to be the public NIC used by all systems [y,n,q,b,?] (y)
Press Return if all systems use the same public NIC. You are prompted to enter a NIC for each system if unique NICs are used.
如果 hme0是所有主机都使用的公共网卡，按回车
选择yes，否则为每台主机指定一块公共网卡
18.为集群管理（Cluster Manager）指定一个虚拟IP。
Enter the Virtual IP address for Cluster Manager: [b,?] 10.180.88.199
19.为集群管理（Cluster Manager）指定一个子网掩码，你可以使用默认子网掩码，或手工指定另外一个。
Enter the netmask for IP 10.180.88.199: [b,?] (255.255.240.0)
20.安装工具要你核对输入的信息是否正确，如果不对，选“n”重新输入上述信息，否则回车确认。
Cluster Manager (Web Console) verification:
NIC: hme0
IP: 10.180.88.199
Netmask: 255.255.240.0
Is this information correct? [y,n,q] (y)
◆ If the information is not correct, answer “n.” The installer prompts you to enter the information again.
◆ If the information is correct, press Return.
配置SNMP邮件通知
21. 安装程序需要下面的信息来配置VCS的SNMP邮件通知特性。1）基于域的SMTP
服务器的主机名。2） 每个SNMP接收器的EMAIL地址。3） 发送到每个SNMP接收器的最小事件严重级别。你可以输入“n”跳过SNMP配置。
The following information is required to configure SMTPnotification:
The domain-based hostname of the SMTP
server
The email address of each SMTP recipient
A minimum severity level of messages to send to each recipient
Do you want to configure SMTP notification? [y,n,q] (y) y
You can enter “n” and skip configuring SMTP notification. The program advances you to the screen enabling you to configure SNMP notification (see step 24).
22.必需提供下面的信息来配置SNMP通知。1） 基于域的SMTP服务器的主机名。2）SMTP接收器的完整EMAIL地址 。3）给指定的接收器选择最小事件严重级别。
Enter the domain-based hostname of the SMTP server (example: smtp.yourcompany.com): [b,?] smtp.xyzstar.com
Enter the full email address of the SMTP recipient (example:
user@yourcompany.com ): [b,?]ozzie@xyzstar.com
Enter the minimum severity of events for which mail should be sent to
ozzie@xyzstar.com I=Information,W=Warning,E=Error, S=SevereError]: [b,?] w
Would you like to add another SMTP recipient? [y,n,q,b] (n) y
Enter the full email address of the SMTP recipient(example:
user@yourcompany.com ): [b,?]
harriet@xyzstar.com
Enter the minimum severity of events for which mail should besent to
harriet@xyzstar.com [I=Information,W=Warning,E=Error, S=SevereError]: [b,?] E
Would you like to add another SMTP recipient? [y,n,q,b] (n)
23. 安装工具要你核对输入的信息是否正确，如果不对，选“n”重新输入上述信息，否则回车确认。
SMTP Address: smtp.xyzstar.com
Recipient:
ozzie@xyzstar.com receives email for Warning or higher events
Recipient:
harriet@xyzstar.com receives email for Error or higher events
Is this information correct? [y,n,q] (y)
◆ If the information is not correct, answer “n.” The installer prompts you to enter the information again.
◆ If the information is correct, press Return.
配置SNMP trap通知
24.安装程序需要下面的信息去配置VCS的SNMP trap通知特性。1）接收VCS trap信息的SNMP控制台主机名。2）每个控制台SNMP trap守护进程的端口。3)发送到每个控制台的最小事件严重级别。如果没有配置SNMP，跳到第27步，配置Global Cluster option。
System names of SNMP consoles to receive VCS trap messages
SNMP trap daemon port numbers for each oonsole
A minimum severity level of messages to send to each console
Do you want to configure SNMP notification? [y,n,q] (y)
You can enter “n” and skip configuring SNMP notification. The program advances you to the screen enabling you to configure the Global Cluster option.
25.必需提供下面的信息来配置SNMP trap通知。1） 基于域的SMTP服务器的主机名。2）SMTP接收器的完整EMAIL地址 。3）给指定的接收器选择最小事件严重级别。
Enter the SNMP trap daemon port: [b,?] (162)
Enter the SNMP console system name: [b,?] Saturn
Enter the minimum severity of events for which SNMP traps should be sent to saturn [I=Information, W=Warning, E=Error,S=SevereError]: [b,?] E
Would you like to add another SNMP console? [y,n,q,b] (n) y
Enter the SNMP console system name: [b,?] Jupiter
Enter the minimum severity of events for which SNMP traps should be sent to saturn [I=Information, W=Warning, E=Error,S=SevereError]: [b,?] S
Would you like to add another SNMP console? [y,n,q,b] (n)
26. 安装工具要你核对输入的信息是否正确，如果不对，选“n”重新输入上述信息，否则回车确认。
SNMP Port: 162
Console: saturn receives SNMP traps for Error or higher events
Console: jupiter receives SNMP traps for SevereError or higher events
Is this information correct? [y,n,q] (y)
◆ If the information is not correct, answer “n.” The installer prompts you to enter the information again.
◆ If the information is correct, press Return.
[
Last edited by sendbank on 2005-4-30 at 14:46 ]
